Ge ZBD6900 Manuel d'utilisateur télécharger pdf (Page 27)

Questions?

Use this

problem

solver

PROBLEM POSSIBLE CAUSE WHAT TO DO

Dishwasher won’t start Door not properly closed •

Press door until it clicks shut

Door opened during cycle • Re-latch door. Wait a few minutes.

when water is hot Dishwasher will restart automatically.

Child Lockout mode is • Press and hold desired button for two

selected seconds. See Child Lockout mode section

for models ZBD6400, ZBD6500, ZBD6700,

ZBD6900, ZBD7000 and ZBD7100.

Power supply not • Check dishwasher is plugged in and switch

connected is on.

Door not properly closed • Press door until it clicks shut.

Dishwasher is paused • To restart the wash cycle, press the

selected wash button.

Water supply valve •

Open water supply valve.

turned off

Program taking too Low inlet water •

Run tap until water is hot prior to starting

long or not advancing temperature

dishwasher cycle.

properly • Allow time to heat water (up to one hour).

• Check inlet water temperature.

• Connect to hot water supply.

Outlet blocked •

Check garbage disposal and air gap for

blockage.

•

Check outlet hose for kinks and sharp

bends.

Dishwasher continues Faulty fill valve •

First, turn off water supply valve; then turn

to drain indefinitely

off circuit breaker and call for service.

Yellow color on dishes Water has iron or other •

A special filter in the water supply line

and glassware mineral content is the only way to correct this problem.

Contact a water softener company.

White film on glasses, Hard water •

Try progressively increasing the Rinse Aid

tea, and coffee stains setting to 6. See the Rinse Agent section.

Repeated use of SANI •

Discontinue use of SANI option.

Brown spots or pitting Consistently low water •

Check operating water level is between

of stainless steel and level in dishwasher the MIN. and MAX. indicators on lower

tarnishing of silver spray arm support tower. See Care and

Cleaning section.

Electrolysis following •

Wash scratched or worn pieces by hand.

contact with other metals Polish silverware with a silver-plate cleaner.

Detergent thrown over the •

Load detergent properly. See Using the

cutlery or saucepans Dishwasher section.

Light goes out •

Call for service.

All cycle status

indicators flashing or

beeping every 30

seconds (on ZBD6400,

ZBD6500, ZBD6700,

ZBD6900, ZBD7000

and ZBD7100)

Motor starts but

water doesn’t enter

dishwasher (flashing

CHINA CRYSTAL or

LIGHT WASH light)

(on models ZBD6400,

ZBD6500, ZBD6700,

ZBD6900, ZBD7000

and ZBD7100)

Water does not empty

out of dishwasher

(flashing RINSE

ONLY or SANI WASH

light) (on models

ZBD6400, ZBD6500,

ZBD6700, ZBD6900,

ZBD7000 and

ZBD7100)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Commentaires sur ces manuels

Pas de commentaire

Ge ZBD6900 Manuel d'utilisateur Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Ge ZBD6900