Ge PSXH43 Manuel d'utilisateur Page 22

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 52
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 21
Problem Possible Causes What To Do
Static occurs
Overdrying Try a fabric softener.
Adjust controls for less drying.
No fabric softener was used Try a fabric softener.
Synthetics, permanent press and Try a fabric softener.
blends can cause static
Inconsistent drying times
Type of heat Automatic drying times will vary according to the type
of heat used (electric, natural or LP gas), size of load,
types of fabrics, wetness of clothes and condition of
exhaust ducts.
Clothes take too long
Improper sorting Separate heavy items from lightweight items (generally,
to dry
a well-sorted washer load is a well-sorted dryer load).
Large loads of heavy fabrics (like Large, heavy fabrics contain more moisture and take
beach towels) longer to dry. Separate large, heavy fabrics into smaller
loads to speed drying time.
Controls improperly set Match control settings to the load you are drying.
Lint filter is full Clean lint filter before every load.
Improper or obstructed ducting Check
Installation Instructions
for proper
ducting/venting.
Make sure ducting is clean, free of kinks and
unobstructed.
Check to see if outside wall damper operates easily.
Check the
Installation Instructions
to make sure the dryer
venting is correct.
Blown fuses or tripped circuit Replace fuses or reset circuit breakers. Since most
breaker dryers use two fuses/breakers, make sure both are
operating.
Overloading/combining loads Do not put more than one washer load in the dryer at
a time.
Underloading If you are drying only one or two items, add a few items
to ensure proper tumbling.
Clothes are wrinkled
Overdrying Select a shorter drying time.
Remove items while they still hold a slight amount of
moisture. Select a LESS DRY setting.
Letting items sit in dryer after Remove items when cycle ends and fold or hang
cycle ends immediately.
Overloading Separate large loads into smaller ones.
Clothes shrink
Some fabrics will naturally shrink To avoid shrinkage, follow garment care labels exactly.
when washed. Others can be
safely washed, but will shrink
Some items may be pressed back into shape after drying.
in the dryer
If you are concerned about shrinkage in a particular item,
do not machine wash or tumble dry it.
Before you call for service…
22
Consumer Support
Troubleshooting Tips
Operating Instructions Safety InstructionsInstallation Instructions
Troubleshooting Tips
Vue de la page 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Commentaires sur ces manuels

Pas de commentaire