GE GFD48ESPKDG Manuel du propriétaire télécharger pdf (Page 30)

EXHAUSTING THE DRYER (cont.)

NEVER LEAVE THE BACK OPENING WITHOUT THE

PLATE.

(Kit WE49X22606.)

Installation Instructions

SIDE VENTING (cont.)

Connect standard metal elbows and ducts to

complete the exhaust system. Cover back opening

with a plate (Kit WE49X22606) available from your

local service provider. Place dryer in final location.

ADDING COVER PLATE TO REAR OF CABINET

(SIDE EXHAUST)

ADDING ELBOW AND DUCT FOR EXHAUST TO

LEFT OR RIGHT SIDE OF CABINET (cont.)

• Apply duct tape as

shown on the joint

between the dryer

internal duct and the

elbow, and also the joint

between the elbow and

the side duct.

Use 4” rigid metal ducting

only inside the dryer. Internal duct joints must be

secured with tape, otherwise they may separate

and cause a safety hazard

Duct tape

BOTTOM VENTING:

Dryer Exhaust to the bottom of cabinet for

Gas and Electric models WITHOUT Built-In

Pedestal™.

Remove the screw inside the dryer exhaust duct

and save. Pull the duct out of the dryer. Detach

and remove the bottom knockout.

Fixing hole

Cut the duct as shown and keep portion A.

ø4”

Remove

screw

and save

Remove desired

knockout (one only)

Bottom

- Fire Hazard

WARNING

Close the back opening with cover plate (Kit

WE49X22606).

Disconnect dryer from electrical supply.

Wear gloves and arm guards.

Failure to do so may result in fire, electrical shock

or lacerations.

Plate

(Kit WE49X22606)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 143 144

Commentaires sur ces manuels

Pas de commentaire

GE GFD48ESPKDG Manuel du propriétaire Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Sèche-linge électrique GE GFD48ESPKDG