GE PSB48YPHSV Manuel d'instructions télécharger pdf (Page 39)

100

13 TURN ON THE POWER

• Set the Master Power switch to the I (ON)

position.

• Check to make sure power to refrigerator is on

by opening refrigerator door to see if interior

lights are on.

• The temperature controls are preset at 37°F

for the Fresh Food section and 0°F for the

Freezer section.

• Allow 24 hours to stabilize before making

adjustments.

Raise

Grille

Panel

Water Filter

Master

Power Switch

12 CONNECT WATER SUPPLY

Check to make sure that Master Power switch

is in the O (OFF) position.

• Locate and bring GE Smart Connect

™

tubing

to the front of the cabinet.

• Turn the water on to flush debris from line.

Run about a quart of water through tubing

into a bucket, then shut off water.

Copper Tubing

• Slip a 1/4” nut and ferrule onto end

of copper tubing. Insert tube into the union fitting

on the unit and tighten nut to union.

• Turn on the water to check for leaks.

GE SmartConnect

™

Tubing

• Insert the molded end of the tubing

into the refrigerator connection. Tighten

the compression nut until it is just hand tight.

• Tighten one additional turn with a wrench.

Overtightening can cause leaks.

• Turn on the water to check for leaks.

Note: Make sure excess tubing length does not

interfere with toekick installation.

Refrigerator

Water Supply

House

Water Supply

Installation Instructions

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 99 100

Commentaires sur ces manuels

Pas de commentaire

GE PSB48YPHSV Manuel d'instructions Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs GE PSB48YPHSV