Ge 00025467 Manuel d'utilisateur télécharger pdf (Page 41)





No dial tone

• Check and repeat installation steps:

Ensure the base power cord is connected to a working outlet .

Ensure the telephone line cord is connected to the base and the wall jack.

• Connect another phone to the same jack; if there is still no dial tone, the problem

might be your wiring or local service.

• The cordless handset may be out of range of the base. Move closer to the base.

• Ensure the battery is properly charged (16 hours).

• Ensure the battery pack installed correctly.

• Did the handset beep when you pressed the 

button? The

battery may need to be charged.

• Place handset in charge cradle for at least 0 seconds.

Dial tone is OK, but can’t dial out

• Make sure the

 setting on the base is set to the type of phone

service you are subscribed to.

Handset/Base does not ring

• Make sure the handset ringer and the base ringer is

.

• The cordless handset may be out of range. Move closer to the base.

• You may have too many extension phones on your line. Try unplugging some

phones.

• Check for dial tone. If no dial tone is heard, see "No dial tone" above.

You experience static, noise, or fading in and out

• Change channels.

• The cordless handset may be out of range of the base. Move closer to the base.

• Make sure base is not plugged into an outlet with another household appliance.

• Charge the battery.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 99 100

Pas de commentaire

Ge 00025467 Manuel d'utilisateur Page 41