Ge EPM9450Q Manuel d'utilisateur télécharger pdf (Page 238)

230 PMCS Interface Toolkit

Reset

• WATT Hour

• VAR Hour

• VA Hour

If it is kilo volt inputs, the decimal placement is 2 (as shown in the screen); if kilo amp input the decimal placement is 3

and if mega watt input, it is 1.

Note: Configured is displayed in green, Enabled in red and Reset in Amber.

Setup Two Tab

The screen explains various parameters related to Limits and Triggers:

Brief explanation of each of the columns is described below

Column Description

Limit 1 Limit 1 value for the Associated quantity (For example: Phase A Amps)

Trigger - Relay 1 LED display in Amber color : Limit 1 of the associated value will trigger Relay 1.

LED display in Gray color: Limit 1 of the associated value will not trigger Relay 1.

Trigger - Relay 2 LED display in Amber color : Limit 1 of the associated value will trigger Relay 2.

LED display in Gray color: Limit 1 of the associated value will not trigger Relay 2.

Limit 2 Limit 2 value for the Associated quantity (For example: Phase A Amps)

Trigger - Relay 1 LED display in Amber color : Limit 2 of the associated value will trigger Relay 1.

LED display in Gray color: Limit 2 of the associated value will not trigger Relay 1.

Trigger - Relay 2 LED display in Amber color : Limit 2 of the associated value will trigger Relay 2.

LED display in Gray color: Limit 2 of the associated value will not trigger Relay 2.

Set Above/Below Limit 1 LED display in RED color : Limit 1 of the associated value is Set for Above.

LED display in Gray color: Limit 1 of the associated value is Set for Below.

Set Above/Below Limit 2 LED display in RED color : Limit 2 of the associated value is Set for Above.

1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 303 304

Pas de commentaire

Ge EPM9450Q Manuel d'utilisateur Page 238