Ge ZV925SLSS Manuel d'utilisateur télécharger pdf (Page 15)

Installation Instructions

STEP 8 CONNECT ELECTRICAL

Verify that power is turned off at the source.

WARNING: If house wiring is not 2-wire

with a ground wire, a ground must be provided by

the installer. When house wiring is aluminum, be sure

to use U.L. approved anti-oxidant compound and

aluminum-to-copper connectors.

AVERTISSEMENT :

Si la maison n’est pas câblee avec deux fils et un

fil de terre, l’installateur doit installer un fil de terre.

Quand les fils sont en aluminium, il faut prendre soin

d’utiliser des connecteurs aluminium à cuivre avec

une pâte antioxydante approuvée par U.L.

• Remove junction box cover and knockout on the

left side.

• Secure the house wiring to the junction box with

a strain relief.

• Connect white leads to branch circuit white lead.

• Connect black leads to branch circuit black lead.

• Connect green/yellow leads to branch circuit green

lead or bare ground lead.

• Secure all connections with wire nuts on each

electrical connector.

• Push wires into junction box and replace cover.

Be sure wires are not pinched.

• Secure J-Box cover with original screw.

Knockout

J-Box

cover

J-Box

cover

House wiring

,167$//$7,21³9(17('727+(2876,'(

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Pas de commentaire

Ge ZV925SLSS Manuel d'utilisateur Page 15