GE JKP35 Manuel d'utilisateur télécharger pdf (Page 2)

ge.com

27" built-in double oven dimensions (in inches)

27" models PK956, JKP75, JKP55, JKP35

Oven support

for 27" models

Minimum

cutout location

from floor

Allow minimum of

21" for clearance

to adjacent corners,

drawers, walls, etc.

2" X 4" or

equiv. runners

Conduit

(48-1/2"

long)

Allow 3/4" for overlap

of oven over all

edges of cutout

Recommended

junction box

locations.

Locate junction

box either 5" MIN.

below cutout

floor or 48" MIN.

above cutout

floor

Locate

junction box

for 27"models

either 5" MIN.

below cutout

floor or 44"

MIN. above

cutout floor

Allow 3/4"

for overlap

over all edges

of cutout

Minimum

cutout location

from floor

2" X 4" or

equiv. runners

(cutout floor)

21" MIN.

door opening

allowance

Locate

junction box

for 24"models

56" MIN. above

cutout floor

Conduit

(48-1/2" Long)

27" built-in double ovens (continued)

2 x 4 or

equivalent

runners

Suitable

bracing

to support

runners

18"

over centerline

of cabinet

Suitable

bracing

to support

runners

18"

Over centerline

of cabinet

2" x 4" or

equivalent

runners

(Must support 300 lbs.)

(Must support 275 lbs.)

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at

least a 194°F temperature rating.

Note: If marks, blemishes or the cutout opening is visible above the installed oven,

it may be necessary to add wood shims under the runners and front trim until the

marks or openings are covered.

Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent

45° and 90° walls should be placed to avoid interference with the handle.

Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent

45° and 90° walls should be placed to avoid interference with the handle.

Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at

least a 194°F temperature rating.

Note: If marks, blemishes or the cutout opening is visible above the installed oven,

it may be necessary to add wood shims under the runners and front trim until the

marks or openings are covered.

Installation information: Before installing, consult installation instructions

packed with product for current dimensional data.

Electric wall ovens are not approved for installation with a plug and receptacle.

They must be hard wired in accordance with installation instructions.

2 x 4 or

equivalent

runners

Suitable

bracing

to support

runners

11"

over centerline

of cabinet

Oven support

for 24" models

27" built-in microwave double oven dimensions (in inches)

Model JKP90

Cabinet JPK956/JKP75/55/35

A – Cabinet width required 27" min.

B – Minimum cabinet depth 23-5/8"

C – Opening width 25" min. - 25-1/4" max.

D – Opening height 50-1/8" max.

E – Recommended minimum

cutout location from floor 13-1/4"

Oven

F – Overall depth* 23-5/8"

w/o trim 51"

G – Overall height with trim 51-7/8" - 52-3/4"

H – Overall width 26-5/8"

* Depth including door handle is approximately 26-7/10" min. to

26-8/10" max. on models PK956, JKP75/55/35.

Cabinet 27"

A – Cabinet width required 27" min.

B – Minimum cabinet depth 23-5/8"

C – Opening width 25" min. - 25-1/4" max.

D – Opening height 41-1/4" max.

E – Minimum cutout location from floor 22"

Oven

F – Overall depth* 23-5/8"

w/o trim 42-1/8"

G – Overall height with trim 43" - 43-7/8"

H – Overall width 26-5/8"

* Depth including door handle is approximately 26-7/10" min. to 26-8/10" max.

47019_GE_57 5747019_GE_57 57 2/6/07 4:34:10 PM2/6/07 4:34:10 PM

1 2

(continued) 2

Commentaires sur ces manuels

Pas de commentaire

GE JKP35 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Fours GE JKP35