Ge 28301 Manuel d'utilisateur télécharger pdf (Page 16)

back into the base and wall outlet. Reconnect the battery

and charge for 16 hours.

Handset displays "SEARCHING" or "NOT REGISTERED" and

cannot link up with the base when the TALK/CALL BACK

button is pressed.

• Handset may be out of range of the base. Move closer to

the base.

• Make sure the power adaptor is properly installed.

• Disconnect the handset battery and plug it in again. Place

the handset on the cradle for at least 2 to 3 minutes.

• Disconnect the power adaptor and plug it in again. Then

place the handset on the cradle for at least 2 to 3 minutes.

Handset displays "HANDSET NEEDS REGISTRATION"

• Follow the programming in the telephone procedures to

re-register the handset to the base.

• Press the SELECT button to begin handset registration.

Follow instructions on Handset screen.

Registration did not work

• Charge the batteries for 16 hours.

• Uplug and then plug in the power adaptor.

Caller ID Solutions

No Display

• Charge or replace the batteries.

• Make sure that the unit is connected to a non-switched

electrical outlet. Disconnect the AC power adaptor from

the base and reconnect it.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Pas de commentaire

Ge 28301 Manuel d'utilisateur Page 16