Ge 15 Manuel d'utilisateur télécharger pdf (Page 18)

Installation Instructions

Tighten any connections that leak.

TURN THE WATER ON AT THE

SHUTOFF VALVE

INSTALLING THE WATER LINE (CONT.)

Arrange the coil of copper tubing so that it does not

vibrate against the back of the refrigerator or against

the wall. Push the refrigerator back to the wall.

PLUG IN THE REFRIGERATOR

Set the icemaker power switch to the ON position.

The icemaker will not begin to operate until it

reaches its operating temperature of 15°F

(–9°C) or below. It will then begin operation

automatically if the icemaker power switch is in

the ON position.

NOTE: In lower water pressure conditions, the

water valve may turn on up to 3 times to deliver

enough water to the icemaker.

START THE ICEMAKER

REVERSING THE DOOR SWING

Power

switch

When reversing the door swing:

• Read the instructions all the way through before

starting.

• Handle parts carefully to avoid scratching paint.

• Set screws down by their related parts to avoid using

them in the wrong places.

• Provide a non-scratching work surface for

the doors.

IMPORTANT: Once you begin, do not move the

cabinet until door-swing reversal is completed.

These instructions are for changing the hinges from

the right side to the left side—if you ever want to change

the hinges back to the right side, follow these same

instructions and reverse all references to left and right.

IMPORTANT NOTES

Phillips screwdriver

TOOLS REQUIRED

Masking tape

T20 or T25

Torxdriver,

whichever your

model requires

5/16″ hex-head

socket driver

5/16″ open-end

wrench

Putty knife or thin-

blade screwdriver

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Ge 15 Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs Ge 15