Ge ZDIS150ZSS Manuel d'utilisateur télécharger pdf (Page 9)

Installation Instructions

CONNECT DRAIN

This ice maker is

equipped with a gravity

drain to prevent water

from flowing back into

the storage bin and

overflowing onto

the floor. The ideal

installation has a

standpipe with a 2”

to 1-1/2” PVC drain

reducer installed directly

below the drain tube:

– A 1” min. physical gap

between the bottom of

the ice maker drain hose

and the top of the house

drain is required. See

illustration.

– 7-1/2” to centerline

of the opening.

– Approximately 3-1/2” high.

– 22” from the front, or

22-3/4” when installing a

3/4” door panel.

'UDLQOLQHVPXVWEHDWOHDVWµLQVLGHGLDPHWHU

NOTE: A drain pump is necessary when a floor

drain is not available. Order ZPK2 Drain Pump Kit

or contact your local plumber for a recommended

pump available in your area.

TEST DRAIN HOSE ALIGNMENT: Before sliding the

ice maker into the cabinet opening, check to be sure

the bottom of the drain tube is below the rear cover.

To test, place a pan below the drain hose. Slowly

pour a gallon of water into the ice bin and check to

be sure that water does not wet the rear cover.

1-7/8”

22”

22-3/4” with 3/4”

Custom Panel

1” Min. Gap

Drain Hose

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 17 18

Commentaires sur ces manuels

Pas de commentaire

Ge ZDIS150ZSS Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs Ge ZDIS150ZSS