Ge JGP329DETBB Manuel d'utilisateur Page 4

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 32
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 3
Installation Instructions
PREPARING THE OPENING
[Ü MAINTAIN THE FOLLOWING
MINIMUM CLEARANCE
DIMENSIONS
13" MAX. Depth of unprotected
overhead cabinets
30" MIN. clearance from countertop
to unprotected overhead surface
3-3/4" MIN. clearance from
cutout to side wall on the
left of the unit
6" MIN. clearance from
ci^1;out to side wall on the
/ right of the unit
18" MIN. height
from countertop to
nearest cabinet on
either side of unit
7/16"
3-5/8'
NOTE: Allow 7/15"
minimum vertical
clearance from the
cooktop bottom (or 3-5/8"
minimum depth from
the countertop) to any
combustible surfaces,
such as a cabinet drawer.
For island installation, maintain 2-1/2 in. minimum
from cutout to front and back edge of countertop.
Maintain 3 in. minimum from cutoutto side edges of
countertop.
H OVERALL COOKTOP DIMENSIONS
21" (21-1/2" Max. for
Glass Top models)
\
_"^3-3/16"
19-3/8"
H CUTOUT DIMENSIONS OF
COUNTERTOP
To ensure accuracy, it is best to make a
template when cutting the opening in the
counter.
19-5/8" width cut
28-1/2"
length^^ 14-1/4":
/
2-1/4" Min. Between
cutout and the wall
behind the cooktop
of cut
2-1/2" Min. from front
edge of cutout and front
edge of countertop
H RECOMMENDED GAS SUPPLY
LOCATION FROM BACKWALL
' Min. From Backwall
Recommended
gas supply
location
13-1/4"^
0 From Cutout
^
Center Line
H MAKE SURE WALL COVERINGS,
COUNTERTOP AND CABINETS
AROUND COOKTOP CAN
WITHSTAND HEAT (UP TO 200“F)
GENERATED BY COOKTOP
Wall covering,
cabinets and
countertop must
withstand heat
up to 20F
H FOR AMERICANS WITH DISABILITIES
ACT (ADA) FORWARD APPROACH
INSTALLATION ONLY:
Aiiow 5" minimum
depth between the
countertop and an
enciosure.
NOTE: The enciosure must be mode of wood
moterioi. Aiso, on access ponei is required for the
eiectricoi outiet, pressure reguiotor, shut-off voive,
hoid-down brockets, and service.
Vue de la page 3
1 2 3 4 5 6 7 8 9 ... 31 32

Commentaires sur ces manuels

Pas de commentaire