Ge 21011 Manuel d'utilisateur télécharger pdf (Page 11)

WALL MOUNTING THE BASE

NOTE: For best results, leave the phone on a flat surface during initial

charging before you hang the phone on the wall.

1. Turn the base over.

2. Attach the wall mounting pedestal by first inserting the tabs on the open

edge of the pedestal into the slots on the lower portion of the bottom of

the base. Then push down and snap the pedestal into place.

3. Slip the mounting holes (on the back of the pedestal) over the wall plate

posts and slide the unit down into place. (Wall plate not included.)

TELEPHONE SETUP

PROGRAMMABLE FUNCTIONS

This system uses a menu structure and soft key function buttons to give

you access to all of the built-in features.

USING THE SOFT KEYS

There are three buttons under the display box which represent several soft

key (programmable) functions. Use the buttons to activate the soft key

icons that appear in the display box. You may program the following items

with the soft keys: Language, Display Contrast, Area Code, Ringer Tone,

Time, Tone/Pulse, Registration, Deregistration, Walkie-Talkie, and Default

Setting.

LANGUAGE

This setting may be made with the handset or the base.

Make sure your phone is OFF (not in TALK mode).

1. Press the MENU soft key to go to the main menu.

LANGUAGE

AREA CODE

EXIT

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 123 124

Pas de commentaire

Ge 21011 Manuel d'utilisateur Page 11