Ge 21011 Manuel d'utilisateur télécharger pdf (Page 29)

BASE

1. Press the ringer button and the current ringer setting shows in the display.

2. Use the touch tone pad on your handset to enter

1HI

2LOW

, or

3OFF

, or

use the CID (up and down arrow) to scroll to your selection.

3. Press the OK soft key to save your selection, and the ringer setting

shows in the display for two seconds then returns to standby mode.

FLASH/CALL WAITING

If you subscribe to the combined Call Waiting Caller ID service from your local

telephone company, you will receive Caller ID information (if available) on Call

Waiting calls. During a phone call you will hear a beep, which indicates

another call is waiting on the line, and Caller ID information shows in the

handset display. To connect to the waiting call, press the flash button on the

handset and your original call is put on hold. You may switch back and forth

between the two calls by pressing the flash button.

TIP: Don’t press the talk/callback button on the handset or the speaker/

callback button on the base to activate a custom calling service, such as call

waiting, or you’ll hang up the phone.

1 HI 2 LOW 3 OFF

EXIT

RINGER HIGH

RINGER LOW

01:15 PM

NEW CALL 00

DIR

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 123 124

Pas de commentaire

Ge 21011 Manuel d'utilisateur Page 29