GE JGBP38 Manuel d'utilisateur télécharger pdf (Page 12)

OVEN CONTROL, CLOCK AND TIMER

Clock To Set the Clock

The clock must be set for the automatic oven timing

functions to work properly. The time of day cannot be

changed during a Timed Baking or Self-Cleaning cycle.

1. Press the CLOCK pad.

2. Press the + or – pad to set the time of day.

3. Press the CLOCK pad to start.

CLOCK

Timer To Set the Timer

The timer is a minute timer;

it does not control oven operations.

The maximum setting on the timer

is 9 hours and 55 minutes.

1. Press the TIMER

ON/OFF pad.

2. Press the + or –

pad to set the

amount of time

on the timer.

The timer will start automatically

within a few seconds of releasing

the pad. The timer, as you are

setting it, will display seconds until

1 minute is reached. Then it will

display minutes and seconds until

60 minutes is reached.

After 60 minutes, it will display

hours (“HR” now appears in

display) and minutes until the

maximum time of 9 hours and

55 minutes is reached.

–



TIMER

ON/OFF

To Reset the Timer To Cancel the Timer

If “TIMER” is displayed, press the + or – pad until

desired time is reached.

If “TIMER” is not displayed, press the TIMER

ON/OFF pad first, then follow the instructions above

to set the timer.

Press and hold the TIMER ON/OFF pad until the

word “TIMER” disappears from the display.

End of Cycle Tone Display Messages

The end of cycle tone is a series of three beeps

followed by one beep every six seconds. If you would

like to remove the signal that beeps every six seconds,

press and hold the CLEAR/OFF pad for 10 seconds.

To return the signal that beeps every six seconds,

press and hold the CLEAR/OFF pad for 10 seconds.

If “door” appears in the display, the door is open.

Close the door. If “LOCK” appears in the display, the

oven door is in the locked position. BAKE, BROIL

and COOK TIME cannot be set if the door is in the

locked position.

Power Outage

After a power outage, when power is restored, the

display will flash and time shown will no longer be

correct—for example, after a 5-minute power

interruption the clock will be 5 minutes slow.

All other functions that were in operation when the

power went out will have to be programmed again.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

GE JGBP38 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Poêles GE JGBP38