GE JGBP38 Manuel d'utilisateur télécharger pdf (Page 24)

OPERATING THE SELF-CLEANING OVEN

Normal Cleaning Time: 3 hours

Before a Clean Cycle

We recommend venting with an open window

or using a ventilation fan or hood during the first

self-clean cycle.

1. Remove the broiler pan, broiler grid, all cookware

and any aluminum foil from the oven—they cannot

withstand the high cleaning temperatures.

NOTE: Take the shelves out of the oven before

you begin the self-clean cycle.

2. Wipe up heavy soil on the oven bottom. If you

use soap, rinse thoroughly before self-cleaning

to prevent staining.

Clean spatters or spills on the oven front frame, and

the oven door outside the gasket with a dampened

cloth. The oven front frame and the oven door outside

the gasket do not get cleaned by the self-clean cycle.

On these areas use detergent and hot water or a soap-

filled steel wool pad. Rinse well with a vinegar and

water solution. This will help prevent a brown residue

from forming when the oven is heated. Buff these

areas with a dry cloth. Do not clean the gasket.

Clean the top, sides and outside front of the oven

door with soap and water. Do not use abrasives or

oven cleaners.

Make sure the oven light bulb cover is in place.

Do not rub or clean the door gasket—

the fiberglass material of the gasket has an

extremely low resistance to abrasion. An intact

and well-fitting oven door gasket is essential for

energy-efficient oven operation and good baking

results. If you notice the gasket becoming worn,

frayed or damaged in any way or if it has become

displaced on the door, you should have it replaced.

4. Close the door and make sure the oven light is off. If

the oven light is not turned off, the life of the bulb

will be shortened or it may burn out immediately.

CAUTION: The grates and drip pans

(on some models) should never be cleaned in

the self-cleaning oven.

Do not use commercial oven cleaners or oven

protectors in or near the self-cleaning oven.

A combination of any of these products plus the

high clean cycle temperatures may damage the

porcelain finish of the oven.

Quick Reminder:

1. Prepare the oven for cleaning.

2. Close and latch the oven door.

3. Press the AUTO CLEAN or AUTO SELF

CLEAN pad.

4. Press the + pad.

If you wish to change the preset Clean Time of

3 hours, press the + or – pad until the desired

Stop Time appears in the display.

Oven

front

frame

Oven door

gasket

Oven

light

Area

inside

gasket

Area

outside

gasket

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

GE JGBP38 Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Poêles GE JGBP38