GE 27957 Manuel d'utilisateur télécharger pdf (Page 43)

• Did the handset beep when you pressed the TALK/call back button? The

battery may need to be charged.

• Place handset in charge cradle for at least 20 seconds.

Dial tone is OK, but can’t dial out

• Make sure the TONE/PULSE setting on the base is set to the type of

phone service you are subscribed to.

Handset/Base does not ring

• Make sure the handset ringer switch is turned on and the base ringer is

programmed to HI.

• The cordless handset may be out of range. Move closer to the base.

• You may have too many extension phones on your line. Try unplugging

some phones.

• Check for dial tone. If no dial tone is heard, see No dial tone above.

You experience static, noise, or fading in and out

• Change channels.

• The cordless handset may be out of range of the base. Move closer to the

base.

• Make sure base is not plugged into an outlet with another household

appliance.

• Charge the battery.

Unit beeps

• Place the handset in the cradle for 20 seconds. If it still beeps, charge

battery for 16 hours.

• Clean charging contacts on cordless handset and charge cradle with a

soft cloth or an eraser.

• See solutions for “No dial tone” on previous page.

• Replace the battery.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 99 100

Pas de commentaire

GE 27957 Manuel d'utilisateur Page 43