GE ZV36 Manuel d'utilisateur télécharger pdf (Page 8)

Light bulbs

The bulbs are located on the underside of

the hood.

To change the light bulbs:

1. Remove the trim ring by turning it

counterclockwise.

2. Grasp the bulb on the edges and remove

by turning it counterclockwise.

3. Replace with the same type and size bulb.

These 120 volt, 50 watt, par 16 halogen flood

bulbs, with standard base, are available at

specialty lighting stores.

These bulbs can also be ordered from your

GE supplier.

Order bulb no. WB08X10028.

Care and Cleaning

Professional Range Hood

Warming

lamps

The warming lamps are located on the

underside of the hood.

These 120 volt, 175 watt, par 38 infrared heat

lamp bulbs, with standard base, are available

at some specialty lighting stores.

These infrared bulbs can also be ordered

from your GE supplier.

Order bulb no. WB08X10029.

NOTE: If warming lamps are not desired,

additional cooktop lighting can be obtained

by replacing the infrared bulbs with standard

incandescent bulbs with up to 100 watt

maximum ratings, with standard bases. These

bulbs are available at specialty lighting stores.

Do not use a steel wool pad; it will scratch

the surface.

To clean the stainless steel surface, use warm sudsy

water or a stainless steel cleaner or polish. Always

wipe the surface in the direction of the grain.

Follow the cleaner instructions for cleaning

the stainless steel surface.

To inquire about purchasing stainless steel

appliance cleaner or polish, or to find the location

of a dealer nearest you, please call our toll-free

number:

National Parts Center 1.800.626.2002

ge.com

Stainless

steel surfaces

(on some

models)

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

GE ZV36 Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Hottes de cuisine GE ZV36