GE ZV800 Manuel d'utilisateur télécharger pdf (Page 23)

Installation Instructions

CONNECT ELECTRICAL

WARNING: If house wiring is not 2-wire

with a ground wire, a ground must be provided by

the installer. When house wiring is aluminum, be sure

to use U.L. approved anti-oxidant compound and

aluminum-to-copper connectors.

ADVERTISSEMENT :

Si la maison n’est pas câblee avec deux fils et un fil de

terre, l’installateur doit installer un fil de terre. Quand

les fils sont en aluminium, il faut prendre soin d’utiliser

des connecteurs aluminium à cuivre avec une pâte

antioxydante approuvée par U.L.

• Remove junction box cover and knockout.

• Use a conduit connector to secure the conduit to

the junction box.

• Connect white leads to branch circuit white lead.

• Connect black leads to branch circuit black lead.

• Connect green/yellow leads to branch circuit green

lead or bare ground lead.

• Secure all connections with wire nuts on each

electrical connector.

• Push wires into junction box and replace cover.

Be sure wires are not pinched.

• Secure electrical panel cover with screws provided.

INSTALL FILTERS

• Remove protective film on the filters.

NOTE: It is not necessary to install the charcoal filter

in a vented installation.

• Tip the filter into the slots at the rear of the opening.

Lift the filter lock and pull forward until the filter

rests in the slots.

• Install both metal grease filters.

• To remove the filters, press inwards on the handle

and pull the filter downwards.

Filter Locks

INSTALL REAR MOUNTING

SCREWS

• Pull the glass canopy forward to access and install

2 wood screws or fasteners through the bottom of

the hood and into the wall.

Install 2 Wood Screws

UNDER-CABINET INSTALLATION

1 2 ... 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

GE ZV800 Manuel d'utilisateur Page 23

Commentaires sur ces manuels

Produits connexes et manuels pour Hottes de cuisine GE ZV800