GE JGRP16 Manuel d'utilisateur télécharger pdf (Page 20)

OPERATING THE SELF-CLEANING OVEN

(continued)

After Self-Cleaning

You may notice some white ash in the oven. Just wipe

If the oven is not clean after one clean cycle, repeat

up with a damp cloth after the oven cools.

the cycle.

If white spots remain, remove them with a soap-filled

If the shelves become hard to slide, wipe the shelf

steel wool pad. Be sure to rinse thoroughly with a

supports with cooking oil.

vinegar and water mixture. These deposits are usually

NOTE: No functions can be programmed before the

a salt residue that cannot be removed by the clean cycle.

door automatically unlocks.

How to Set Delay Start of Cleaning

Quick Reminder:

1. Prepare the oven for cleaning.

Close the oven door completely.

3. Press the CLEAN pad.

4. Press the INCREASE or DECREASE pad

until the desired Clean Time appears.

5. Press the STOP TIME pad.

6. Press the INCREASE or DECREASE pad

until the desired Stop Time appears in the display.

Delay Start is setting the oven timer to start the clean

cycle automatically at

later time than the present

time of day.

NOTE: Before beginning, make

sure the oven clock

shows the correct time of day.

CLEAN

steps to prepare the oven for cleaning.

2. Press the CLEAN pad.

3. Press the INCREASE or DECREASE

pad

to enter the Clean Time.

4. Press the STOP TIME pad. “STOP

STOP

TIME” and the earliest Stop Time you

TIME

can set will appear in the display.

The earliest Stop Time will be the Clean Time

selected plus the time of day.

For example: If the

Clean Time is

hours and the time of day is

6:00,

the Stop Time that appears in the display

will be

9:00.

5. Press the INCREASE pad to change the

Stop Time to a later time of day if desired.

For example: If

you set Stop Time at 11

:00,

oven will start clean cycle at

8:00

and end at

:00.

The door latches automatically.

The self-clean cycle will automatically begin after

“CLEAN” is displayed and the time for clean

cycle

is set. The words “ON” and “LOCK” will appear

in the display when the door automatically locks.

It will not be possible to open the oven door until

the temperature drops below the lock temperature

and the LOCK light goes off.

6. When the LOCK light is off, open the door.

NOTE: During a delayed self-clean operation you

can find out when the oven is set to turn on by

pressing and holding the CLEAN pad for

seconds.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

GE JGRP16 Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers GE JGRP16