GE GDT695SSJSS Manuel d'installation télécharger pdf (Page 10)

Dishwasher Installation

PUSH DISHWASHER INTO

FINAL POSITION (CONT.)

•

Open and close the dishwasher door to be sure it

operates smoothly, and does not rub on the adjacent

cabinet.

Tip: Prevent unnecessary service charges for

panel damage or wash performance.

Check dishwasher alignment prior to opening

dishwasher door to prevent panel damage.

Make sure utility lines are not trapped or crushed behind

dishwasher. Crushed lines will restrict water flow.

LEVEL DISHWASHER (CONT.)

•

Remove the lower dish

rack and place a level on

the door and lower rack

track as shown in Figure V.

• If your model has rear

wheels, the height of the

wheels are adjusted from

the front of the dishwasher

along with the 2 front

legs on the bottom of the

dishwasher. Begin the

leveling process with the

front legs by individually

turning the front 2 legs.

By adjusting the front

legs first,access to the

rear leveling bolts

is maximized

easing rear wheel

adjustment. When

the front legs are

adjusted to a height

resulting in an

appropriate gap to

the upper cabinet,

proceed to adjust

the rear leveling

wheels by adjusting

the leveling bolts as illustrated in Figure W. Individually turn

the 2 bolts to adjust the rear wheels. Slowly rotate the 2 bolts

counter clockwise to raise the back of the dishwasher, and

clockwise to lower it. Continue to adjust the feet and wheels

until the dishwasher is level as illustrated in Figure W. Ensure

all 4 legs/wheels are firmly in contact with the floor.

• If your model has

4 leveling feet,

adjust the level of

the dishwasher by

individually turning the

4 legs on the bottom

of the dishwasher as

shown in Figure WW.

•

The dishwasher

is properly

leveled when the

level indicator is

centered left to right

and front to back. Also, the dishwasher door should close

without hitting the side of the tub.

• Replace the lower rack.

•

Pull each rack out, about halfway. Check to be sure it does

not roll back or forward on the door. If the rack moves,

adjust leveling legs.

Tip: Prevent unnecessary service charges. Verify

dishwasher is leveled.

Pull the dish racks half way out. They should stay put. Open

and close the door. The door should fit in the tub opening

without hitting the side of the tub. If the racks roll on their

own, or the door hits the side of tub, re-level the dishwasher.

Figure V

Adjust

Figure W

STEP 13 STEP 14

LEVEL DISHWASHER

IMPORTANT – Dishwasher must be level for proper dish

rack operation, wash performance and door operation. The

dishwasher must be leveled left to right and front to back.

This ensures the dish racks will not roll in or out on their own,

circulation water will flow to the pump inlet, and the door will

close without hitting the side of the tub.

STEP 14

Figure U

Door Catches

on Cabinet Frame

Correct

Alignment

Incorrect Alignment

will result in door damage

Door

Fits and

Swings

Back

Behind

Cabinet

Frame

Adjust

Figure WW

Check that tub trim does not

contact the door at all points

Tub trim may be trimmed if

necessary to ensure proper

door operation

Top

View

Handle

Door

Tub trim

Tub frame

Do not allow tub trim to get

trapped by or come into

contact with the door

Top

View

Tub trim

trapped

by door!

Cabinet

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

GE GDT695SSJSS Manuel d'installation Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle GE GDT695SSJSS