Ge ZGP304NRSS Manuel d'utilisateur télécharger pdf (Page 19)

INSTALL 12” BACKSPLASH

WARNING:

This backsplash must

be securely fastened to the wall. Failure to do

so could result in damage or personal injury.

• Install and level the range or rangetop and

the range hood according to the installation

instructions.

• Remove the backsplash packaging and

protective film.

• Use a level to pencil a horizontal line on the wall,

1/8” above the range or rangetop. The 1/8” gap

allows the cover panel to overlap the wall support

panel.

• Locate wall studs on each side. Where studs are not

available, plan to use wall anchors (not provided).

• Align the wall support panel on the marked

horizontal line and centered left to right.

• The wall support panel must be secured to the wall

at all 4 corners. Use wood screws (provided) or wall

anchors (not provided) to secure the support panel

to the wall.

• Place the cover panel over the wall support panel

and secure with Torx screws (provided). Install 2

screws on each side.

ZX12B30PSS, ZX12B36PSS, ZX12B48PSS Accessory Installation

237,21$/$&&(6625,(6³” HIGH BACKSPLASH

TOOLS AND MATERIALS REQUIRED

• Gloves to protect against sharp edges

• T-15 and #2 Phillips screwdrivers

• Drill with 3/32” and 9/64”bits

• Safety glasses

• Level

• Pencil

This Kit Includes

• Wall support panel

• Cover panel

• Hardware package with

– 5 Stainless Steel Torx 15 #8

self-tapping screws

– 5 Phillips #2 pan head wood

#10 screws

Wall Support

Panel

Hardware

Package

Install 4

Wood Screws

Install T-15

Screws

Wall

Support

Panel

Wall Support

Panel

Cover Panel

WARNING:

To prevent ignition of combustible materials,

the entire back wall above the range must

be protected by a backsplash constructed

of non-combustible material.

This stainless steel backsplash accessory

must be installed in combination with a custom,

non-combustible backsplash built beyond

the 12” height of the backsplash.

BEFORE YOU BEGIN

Read these instructions completely

and carefully.

IMPORTANT: Save these instructions for local

inspector’s use.

IMPORTANT: OBSERVE ALL GOVERNING CODES

AND ORDINANCES.

NOTE TO INSTALLER: Be sure to leave these

instructions with the Consumer.

NOTE TO CONSUMER: Keep these instructions

with your Owner’s Manual for future reference.

This kit provides for the installation of a 12”

high backsplash for 30”, 36” or 48” Monogram

Professional Ranges and Rangetops.

Center

Arrow

1/8”

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 79 80

Commentaires sur ces manuels

Pas de commentaire

Ge ZGP304NRSS Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la maison Ge ZGP304NRSS