GE IM4A Manuel d'utilisateur télécharger pdf (Page 20)

Installation Instructions

BEFORE YOU BEGIN

Read each step thoroughly before proceeding.

•

CAUTION – Unplug the

Refrigerator. To eliminate the danger

of electric shock during installation,

you must unplug the refrigerator

from its electrical outlet.

WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS N

Are these the right instructions for your model? Follow the Installation Instructions indicated by

the label on the back of the refrigerator--- or

SRQPNML

Flat blade and Phillips

screwdrivers

Pliers

TOOLS YOU WILL NEED

Sharp knife

1/4″ and 5/16″ Nutdrivers

ATTACH THE WATER VALVE

• Locate the female connector plug. Plug the

female connector (C) onto the male terminals

on the water valve (3). Either wire can go on

either terminal.

• Fasten the water valve to the cabinet by driving

the hex-head screw (10) from the kit into the

hole in the cabinet leg.

REMOVE THE COVER

Use a 5/16″ nutdriver or an adjustable wrench to

remove the compressor compartment access cover.

This requires removing six screws which attach the

cover to the back of the refrigerator case.

Be sure to save the screws as the access cover must

be reinstalled later to ensure your refrigerator will

function properly.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 135 136

Pas de commentaire

GE IM4A Manuel d'utilisateur Page 20