GE IM4D Manuel d'utilisation et d'entretien télécharger pdf (Page 16)

BEFORE YOU BEGIN

Read each step thoroughly before proceeding.

•

WARNING

To eliminate the

risk of electric shock or injury during

installation, you must first unplug the

refrigerator before proceeding. Failure

to follow these instructions can result

in electrical shock.

WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS T

Flat blade and Phillips

screwdrivers

Pliers

TOOLS YOU WILL NEED

Sharp knife

1/4"and 5/16" Nutdrivers

ATTACH THE BRACKET EXTENSION

TO THE WATER VALVE

 8VHDµQXWGULYHUWRDWWDFKWKHEUDFNHWH[WHQVLRQ

(16) to the water valve bracket with the screw (17).

REMOVE THE COVER

Use a 5/16" nutdriver or an adjustable wrench to

remove the compressor compartment access cover.

7KLVUHTXLUHVUHPRYLQJVL[VFUHZVZKLFKDWWDFKWKH

cover to the back of the refrigerator case.

Be sure to save the screws as the access cover

must be reinstalled later to ensure your refrigerator

will function properly.

PLASTIC WATER TUBING

• Remove water line from the valve assembly (3)

included in this kit by removing the tube from the

clip and pushing on the bottom of the valve quick-

connect, disengaging the tube and pulling it from

the valve.

• Use the water line from the fill tube assembly

that came with the refigerator. The water line is

attached to the fill tube assembly that is already

installed in the refrigerator. Remove the plug from

the end of the waterline. Route the water line

through the clip on the valve pushing it into the

quick-connect on the valve. The white line will be

barely visible if properly engaged.

Push up

Quick-connect

Pull down

Clip

Water line

%UDFNHWH[WHQVLRQ

Installation Instructions

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

GE IM4D Manuel d'utilisation et d'entretien Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs GE IM4D