Ge 27730 Manuel d'utilisateur télécharger pdf (Page 41)

TELEPHONE

Problem Solution

No dial tone • Check installation:

— Is the base power cord connected to a working

outlet?

— Is the telephone line cord connected to the

base unit and the wall jack?

• Disconnect the base from the wall jack and connect

another phone to the same jack. If there is no dial tone

in the second phone, the problem might be your

wiring or local service.

• Is the handset out of range of the base?

• Make sure the battery is properly charged (12 hours).

• Is the battery pack installed correctly?

• Did the handset beep when you pressed the TALK

button? Did the IN USE indicator come on? The

battery may need to be charged.

Dial tone is OK, but • Make sure the tone/pulse setting is programmed

can't dial out correctly.

Handset does not ring • Make sure the ring volume setting is set to 1 or above.

• You may have too many extension phones on your

line. Try unplugging some phones.

• See solutions for “No dial tone.”

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 99 100

Pas de commentaire

Ge 27730 Manuel d'utilisateur Page 41