GE JDP36GP Manuel d'utilisateur télécharger pdf (Page 11)

Clock

The clock must be set to the correct time of day for

the automatic oven timing functions to work properly.

The time of day cannot be changed during a Timed

Bake or

CLEA-N

cycle.

- -

To Set the Clock

1. Press the CLOCK pad.

CLOCK

2. Press the INCREASE or DECREASE

padtosetthetimeof day.

3. Press the CLOCK pad to start.

Timer To Set the Timer

The timer does not control oven

operations. The maximum setting

on the timer is 9 hours and 59

minutes.

1. Press the TIMER pad.

TIMER

2. Press the INCREASE or

DECREASE pad to set the

amount of time on the timer.

The timer will start automatically

within a few seconds of releasing

the pad. The timer, as you are

setting it, will display seconds until

1 minute is reached. Then it will

display minutes and seconds until

10 minutes is reached.

After 10 minutes, it will display

hours (“HR” now appears in

display) and minutes until the

maximum time of 9 hours and 59

minutes is reached.

To Reset Timer

To Cancel Timer

If “TIMER” is showing, press the INCREASE or

Press the TIMER pad while the word “TIMER”

DECREASE pad until the desired time is reached.

is displayed.

If “TIMER” is not showing, press the TIMER pad

first, then follow the instructions above to set

the timer.

End of Cycle Tones

The end of cycle tone is 3short beeps followed by

To return the end of cycle tone to the repeating beeps,

I beep that repeats every 6 seconds until you press

press and hold the CLEAR/OFF pad for 10 seconds.

any operation. If you would like to eliminate the

repeating beeps, press and hold the CLEAR/OFF pad

for 10 seconds.

Power Outage?

Display Messages

After a power outage, when power is restored the

If “door” appears on the display, the oven door is

display will

flash

and time shown will no longer be

opened and needs to be closed. If “LOCK” appears on

correct—for example, after a 5-minute power

the display, the oven door is in the locked position.

interruption the clock will be 5 minutes slow. Display

BAKE, BROIL and COOK TIME cannot be set if the

flashes until clock is reset. All other functions that

door is in the locked position.

were in operation when the power went out will have

to be programmed again.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

GE JDP36GP Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Fours GE JDP36GP