Ge CGS980 Manuel d'utilisateur Page 25

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 60
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 24
25
Consumer Support
Operating InstructionsSafety Instructions Installation Instructions
Troubleshooting Tips
ge.com
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
CLOCK
pad once. The
display will show
12 hr.
If this is the
choice you want, touch the
START
pad.
Touch the
CLOCK
pad again to change
to the 24-hour military time clock. The
display will show
24 hr.
If this is the choice
you want, touch the
START
pad.
Touch the
CLOCK
pad again to black out
the clock display. The display will show
OFF.
If this is the choice you want, touch the
START
pad.
NOTE: If the clock is in the black-out mode, you will
not be able to use the Delay Start function.
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after the
cooking function is finished.
This feature can only be used when timed
cooking.
To activate this feature, follow the steps
below.
Touch the
BAKE
and
BROIL HI/LO
pads
at the same time for 3 seconds until
the display shows
SF.
Touch the
COOKING TIME
pad. The
display will show
Hld OFF.
Touch the
COOKING TIME
pad again
to activate the feature. The display will
show
Hld ON.
Touch the
START
pad to activate the
cook and hold feature and leave the
control set in this special features
mode.
Your control will allow you to lock out the surface
burners, oven burners and control panel so they
cannot be activated.
To lock/unlock the controls:
Turn all surface burners off.
Touch and hold the
GAS/CONTROL
LOCKOUT
pad for 3 seconds until the
display shows
LOC
.
To unlock the control, touch and hold
the
GAS/CONTROL LOCKOUT
pad for
3 seconds until
LOC
disappears from
the display.
When this feature is on and the touch pads
are touched, the control will beep and the
display will show
LOC
.
The control lock-out mode affects all controls. No
controls will work when this feature is activated.
The adjustment will be retained in memory after
a power failure.
Gas/Control Lockout (on some models)
Vue de la page 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Commentaires sur ces manuels

Pas de commentaire