Ge CGS980 Manuel d'utilisateur télécharger pdf (Page 47)

ASSEMBLE SURFACE BURNERS

(CONT.)

Oval (Center) Burner Head/Cap Assembly

Place the oval (center) head/cap assembly over the

electrode on the cooktop.

Caps

Place the matching size caps onto the burner bases

or heads.

Make sure that the heads and caps are replaced in

the correct locations.

Grates

Place the side and center grates on the cooktop.

These grates are position specific. The undersides of

the side grates are marked “OUTSIDE.” The center

grate can be interchanged front to back.

CAUTION: Do not operate the

burner without all burner parts in place.

Installation Instructions

ELECTRICAL CONNECTIONS (CONT.)

B. Usage Situations where Appliance Power Cord will

be Disconnected Frequently.

Do not use an adapter plug in these situations because

disconnecting of the power cord places undue strain on

the adapter and leads to eventual failure of the adapter

ground terminal. The customer should have the two-

prong wall receptacle replaced with a three-prong

(grounding) receptacle by a qualified electrician

before using the appliance.

The installation of appliances designed for mobile

home installation must conform with the Manufactured

Home Construction and Safety Standard, Title 24 CFR,

Part 3280 (formerly the Federal Standard for Mobile

Home Construction and Safety, Title 24, HUD, Part

280) or, when such standard is not applicable, the

Standard for Manufactured Home Installations, latest

edition (Manufactured Home Sites, Communities and

Set-Ups), ANSI A225.1, latest edition, or with local

codes. In Canada, mobile home installation must be

in accordance with the current CAN/CSA Z240/MH

Mobile Home Installation Code.

Electric Disconnect

■ Locate disconnect plug on the range back.

■ Pinch sides of connector and pull out of range back.

SEAL THE OPENINGS

Seal any openings in the wall behind the range and in the

floor under the range when hookups are completed.

ASSEMBLE SURFACE BURNERS

Burner Heads

Place burner heads over the electrodes on the

cooktop, in the correct locations according to their

size. There is one small, one medium, one extra large

and one dual flame extra large burner head.

Medium head

Front of range

Extra large head

Small head

Dual flame

extra large head

Electrode

Slot

Front of range

Oval head and cap

assembly

Medium cap

Front of range

Extra large cap

Small cap

Dual flame extra

large cap

Make sure the slot in the

burner head is positioned

over the electrode.

Outside grate

Center grate

Burner cap

Burner

head

Burner base

Electrode

Burner cap

Burner

head

Burner

base

Electrode

Stability

chamber

Make sure the slot in the

burner head is positioned

over the electrode.

Make sure the hole in the burner head

assembly is positioned over the electrode

and that the burner head is fully inserted

inside the burner base. A small gap between

the base and head is normal.

Front left, back right and back left burners

Front right burner

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Ge CGS980 Manuel d'utilisateur Page 47

Commentaires sur ces manuels

Produits connexes et manuels pour Radio Ge CGS980