Ge 29 Manuel d'utilisateur télécharger pdf (Page 17)

Installation Instructions

LOADING THE RERIGERATOR

ONTO A HAND TRUCK

Leave all tape and door pads on doors until

the refrigerator is in its final location.

To move the refrigerator, use a padded hand

truck. Center the refrigerator on the hand truck

and secure the strap around the refrigerator.

DO NOT OVERTIGHTEN THE STRAP.

REMOVE THE BASE GRILLE

Remove the grille by removing the two Phillips

head screws.

If the refrigerator must go through

any entrance that is less than 38” wide,

the doors must be removed. Proceed to

Step 3.

DO NOT remove the handles.

If all entrances are more than 38” wide,

skip to Installing the Refrigerator.

DISCONNECT THE WATER COUPLING

(on some models)

If the refrigerator has a water dispenser,

there is a water line from the cabinet into

the bottom hinge on the freezer door that

must be disconnected.

To disconnect, push in on the white collar

of the coupling and pull out the tubing.

White collar

Bottom

freezer

hinge

MOVING THE REFRIGERATOR

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 111 112

Pas de commentaire

Ge 29 Manuel d'utilisateur Page 17