Ge 15142 Outdoor Digital Timer Manuel d'utilisateur télécharger pdf

Scan code or visit:

http://goo.gl/Ed4mR

Step-by-Step

Instructional Video

Outdoor Digital Timer

PROG

AUTO ON OFF

MO TU WE TH FR SA SU

CTD

RND

18 88

88:88

RCL

OK Button

Press and hold to set current time and day

Conﬁrms choices through setting options

and goes to next option

- Button

Turns ON/OFF random setting in clock mode.

Scrolls back down through options in settings mode.

+ Button

Sets Auto ON/OFF options in clock mode.

Scrolls up through options in settings mode.

RCL Button

Turns ON/OFF Daylight Savings feature in

clock mode.

Cancels countdown setting when on.

When programming, press to clear settings.

Reset

Press and hold with toothpick or pencil to

clear all settings.

Display (Shown in standard “clock mode”)

Menu Button

Toggles to programming, countdown and clock

mode display screens.

Install Set Up

1. If the time screen is completely blank it will need to be plugged into an outlet and charged for four

hours before programming can begin. If the screen is displaying numbers, it is ready to

be programmed.

2. Before programming, all settings should be reset. The reset button is located just above the “MENU”

button and is identiﬁed by “RESET”. Use a toothpick or pencil to push the “RESET” button. Once

pushed the screen will show the display below on the screen. See Diagram A

Diagram A Diagram B

Current Time Setting

1. The timer’s default mode setting is clock mode. This will display the current time and day of the

week. See Diagram B

2. In clock mode, press and hold “OK” for 2 seconds to put the timer in clock setting mode.

3. The day will begin to ﬂash on the display. Press “+” or “-” to select the current day and press

“OK” to conﬁrm.

4. The hour will begin to ﬂash on the display. Press “+” or “-” to adjust the hour and press “OK” to

conﬁrm. Take note of the AM/PM setting in the upper left corner of the display.

5. The minute will begin to ﬂash on the display. Press “+” or “-” to adjust the minutes and press

“OK” to conﬁrm.

6. Press “MENU” to ﬁnish setting the clock and return to clock mode.

Note: If there is over 2 minutes of inactivity, the timer will automatically exit clock setting mode and

return to the clock mode.

Programming the On/Off Times

1. In clock mode, press “MENU” to put the timer in program setting mode. “1 On” will begin to ﬂash.

This indicates that the timer is ready to program the “1 On” setting.

- “1”: Indicates program group number (Note: total of 16 program groups)

- “On”: Indicates when the program will power the devices On.

- “Off”: Indicates when the program will power the devices Off.

2. To select program group and power on/off status, press “+” or “-” to cycle through all the program

groups. Press “OK” for the desired program group and ON/OFF status. Next, set the day(s),

hour and minutes.

3. The week will begin to ﬂash on the display. Press “+” or “-” to select the day and press

“OK” to conﬁrm.

Day Group Options:

MO TU WE TH FR SA SU ->

MO -> TU -> WE -> TH -> FR -> SA -> SU ->

MO WE FR ->

TU TH SA ->

SA SU ->

MO TU WE ->

TH FR SA ->

MO TU WE TH FR ->

MO TU WE TH FR SA ->

4. The hour will begin to ﬂash on the display. Press “+” or “-” to adjust the hour and press “OK” to

conﬁrm - Take note of the AM/PM setting in the upper left corner of the display.

5. The minute will begin to ﬂash on the display. Press “+” or “-” to adjust the minutes and press

“OK” to conﬁrm.

6. “1 On” will begin blinking. Push the “+” to begin setting “1 Off”.

7. Go back to Step 3 and complete the same steps for settings Programs 1-16.

8. Once all programs are complete press “MENU” twice to exit program setting mode.

RCL (Recall) Setting

1. Press the “MENU” button and select the On/Off setting that needs to be changed

2. Press the “RCL” button to reset the current On/Off setting.

Switch Mode Indication

The switch mode is shown in the display during clock mode as “ON”, “AUTO ON”, “OFF”, or “AUTO OFF”

together with the time of day. In normal clock mode, use the “+” button to adjust this to the desired

setting. This can be used to override the timer as explained in Diagram C.

Diagram C

ON = Always ON

OFF = Always OFF;

AUTO ON = Timer is activated and lamp/device is on.

The timer will follow the next off program.

AUTO OFF = Timer is activated and lamp/device is off.

The timer will follow the next on program.

DST-Daylight Savings Time Setting

1. In clock mode, press “RCL” to activate Daylight Savings Time. “+1H”will show on the display and the

clock will advance 1 hour forward.

2. Press “RCL” again to deactivate Daylight Savings Time. “+1H” will disappear from the display and

the clock will revert back to normal.

Random Security Option (RND)

Rnd program feature will turn lights On and Off using the programmed times + or - 30 minutes, giving

the house a more lived in appearance while occupant is away.

1. In clock mode, press “-” to start Random function. “RND” shows on the display indicating timer is in

random mode.

2. To cancel random function, press “-” again. RND disappears from the display.

Countdown Setting

1. Press “MENU” twice while in Clock mode to enter into Countdown mode. “CTD” shows on the LCD.

Setting interval is from 99:59:59 to 00:00:01.

2. The hour will ﬂash on the display. Press “+” or “-” to adjust the countdown hour and press “OK” to

conﬁrm.

3. The minutes will begin to ﬂash on the display. Press “+” or “-” to adjust the countdown minutes and

press “OK” to conﬁrm.

4. The seconds will begin to ﬂash on the display. Press “+” or “-” to adjust the countdown seconds and

press “OK” to conﬁrm.

5. “CTD” ﬂashes. This means countdown function is activated.

6. The Timer starts countdown at once. “CTD” ﬂashes on display during the entire countdown period.

There are two functions of Countdown mode:

1. Countdown to turn power on: When the Timer is in ON or AUTO ON status in clock mode, entering

countdown mode changes the status to ON automatically. At the end of the preset countdown

period, power is turned off.

2. Countdown to turn power off: When the timer is in OFF or AUTO OFF status in clock mode, entering

countdown mode changes the status to OFF automatically. At the end of the preset countdown

period, power is turned on.

**Note: Timer works according to the priority level of programs as below:

Countdown>Manual ON/OFF>Random>Program Setting

If the countdown function was activated and the Manual ON/OFF doesn’t work, you need to cancel

countdown function before activating the Manual ON/OFF function.

Power Back-Up

In the event of a power failure, the timer will retain its settings.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modiﬁcations to this equipment. Such modiﬁcations could void the user’s authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encour-

age to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada

PROG

AUTO ON OFF

MO TU WE TH FR SA SU

CTD

RND

18 88

88:88

AUTO OFF ON AUTO ON OFF

15142 Manual Version 2

06/11/2012

PROG

AUTO OFF

Problem

Light or appliance does not turn ON.

Light turns ON/OFF at day instead of night.

Solution

Make sure light/appliance power switch is in ON position. Make sure timer

is in AUTO mode. If timer is in OFF mode the program is not running.

Check to make sure AM/PM time and program settings are correct.

Troubleshooting

After a few seconds

Risk of electric shock

• Do not use with an

extension cord

• Plug directly into a GFCI

protected electrical outlet

• Unplug timer before

cleaning

• Fully insert plug

• Keep children away

Risk of fire

• Do not use to control

appliances that contain

heating elements (cooking

appliances, heaters, irons,

etc.)

•Do not exceed electrical

ratings

• Ratings are for both outlets

combined

WARNING

1 2

Outdoor Digital Timer 1
PRECAUCIÓN 2

Résumé du contenu

Page 1 - Outdoor Digital Timer

Scan code or visit: http://goo.gl/Ed4mRStep-by-Step Instructional VideoOutdoor Digital TimerMENUPROGAUTO ON OFFAMPMMO TU WE TH FR SA SUCTDRND+1h18 8

Page 2 - PRECAUCIÓN

Conﬁguración de ajustes1. Si la pantalla de la hora está totalmente en blanco, será necesario conectar el dispositivo en un tomacorriente y cargarlo

Commentaires sur ces manuels

Pas de commentaire

Ge 15142 Outdoor Digital Timer Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Horloge Ge 15142 Outdoor Digital Timer. GE 15142 Outdoor Digital Timer User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Horloge Ge 15142 Outdoor Digital Timer