GE JSP60GN Manuel d'utilisateur télécharger pdf (Page 31)

Set a Delayed Start

Delay Start is setting the oven timer

start the clean

cycle automatically

a later time than the present

time of day.

NOTE: Before beginning, make sure the oven clock

shows the correct time of day.

Quick Reminder:

Prepare oven for cleaning.

2. Slide the oven door latch to the right as far as

it will go.

3. Push the STOP TIME button.

4. Set the desired time you want the oven to stop.

Turn the SET knob clockwise until the Stop

Time you desire appears in the display.

5. Push the CLEAN button.

6. Turn the SET knob 1/2 turn. Time that appears is

hours before the Stop Time you select.

For example:

Let’s say it’s

7:00

and you want the

oven to begin self-cleaning at

10:30

after you’re

finished in the kitchen. The oven is soiled a normal

mount

so the normal Clean Time of 3

hours is

.“eferred.

Prepare the oven for cleaning.

2. Close the oven door and

make sure the light is off.

Slide the latch handle

the

right as far as it will go.

3. Push STOP TIME button.

4. Turn

the SET knob to time of day when you wish

cleaning to be completed (must be more than

hours later than current time of day).

5. Push the CLEAN button.

6. Turn the SET knob in a clockwise direction about

1/2

turn.

The words “DELAY CLEAN” will be on in the

display until the clean cycle starts. After the clean

cycle starts, the word “CLEAN” will be on in the

display.

7. When the word “LOCK” is not displayed, and the

oven has cooled, slide the latch handle to the left as

far as it will go and open the oven door.

Never force the latch handle. Wait

until the word “LOCK” goes out

●

in the display and the latch slides

easily. Forcing the latch handle

may damage the door lock.

NOTE:

During a delayed self-clean

operation, you can find out when the oven will begin

the self-clean cycle by pushing and holding the

CLEAN button.

NOTE:

● If “F-” and a number flash on the display, and

●

You can find out when the clean cycle will be

the control beeps, this indicates a function error

finished by pushing the STOP TIME button.

code. Press the CANCEL button. Allow oven to

● The word “ DOOr” is displayed when you try to set

cool for 1 hour. Put oven back into operation. If

function error code repeats, disconnect power to the

the clean cycle with the door open or when the oven

temperature is too high.

range. Call for service.

● If the self-cleaning mode malfunctions, turn off and

● Clean Time is normally 3

hours.

Y@trcm

na@

disconnect the power supply. Have serviced by a

the~i

ean

dep~

wdk%y-t

G!ti’1 04 ,

qualified technician.

To Stop a Clean Cycle

Press the CANCEL button.

2. Wait until the oven has cooled below locking temperature and the word

“LOCK” is off in the display. You will not be able to open the door right

away unless the oven temperature is at a safe level.

(eofzfitiueci

tfext

page)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

GE JSP60GN Manuel d'utilisateur Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers GE JSP60GN