GE GLDT696JSS Manuel d'installation télécharger pdf (Page 10)

Installation Instructions

STEP 13 – CONNECT DRAIN LINE

FOLLOW ALL LOCAL CODES AND ORDINANCES.

The drain hose molded end will fit 5/8”, 3/4” or 1”

diameter connections on the air gap, waste tee or

disposer. Cut on the marked line as required for your

installation.

Cutting Lines

3/4"

5/8"

IMPORTANT: Do not cut corrugated

portion of hose

Cutting Lines

IMPORTANT: Do not cut corrugated

portion of hose

• If a longer drain hose is required, add up to 42” of length

for a total of 10 ft. to the factory installed hose.

Use 5/8” or 7/8” inside diameter hose and a coupler to

connect the two hose ends. Secure the connection with

hose clamps.

Hose Clamp

Coupler

Hose Clamp

• Secure the drain hose to the air gap, waste tee or disposer

with clamps.

NOTE: TOTAL DRAIN HOSE LENGTH MUST NOT EXCEED

10 FEET FOR PROPER DRAIN OPERATION.

DRAIN LINE INSTALLATION

• Connect drain line to air gap, waste tee or disposer using

either previously determined method.

Waste Tee Installation

Disposer Installation

Method 2 - High drain loop with waste tee or disposer

Disposer Installation

Fasten to underside

of countertop

32"

Min.

18"

Min.

Fasten to underside

of countertop

18"

Min.

Waste Tee Installation

Method 1 - Air gap with waste tee or disposer

IMPORTANT -

When connecting drain line to

disposer, check to be sure that

drain plug has been removed.

DISHWASHER WILL NOT DRAIN

IF PLUG IS LEFT IN PLACE.

TIP: Avoid unnecessary service call charges. Always be sure

disposer drain plug has been removed before attaching

dishwasher drain hose to the disposer.

Remove

Drain

Plug

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

GE GLDT696JSS Manuel d'installation Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle GE GLDT696JSS