GE GFD49GRSKWW Manuel d'utilisateur Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 144
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
Power
Press to “wake up” the display. If the display is active, press to turn the dryer off.
NOTE: Pressing Power does not disconnect the appliance from the power supply.
1
Control settings.
GEAppliances.com
7
2
Start/Pause
Press to start a dry cycle. If the dryer is running,
press it once and it will pause the dryer. Press it
again to resume the dry cycle.
Getting Started
1
Press the
Power
button.
2
Select a dry cycle. (Defaults are set
for each cycle. These default
settings can be changed. See
Control settings for more
information.)
3
Press the Start/Pause button.
If the screen is dark, a press
of the Power button will
“wake up” the display.
Normal/Mixed Loads
For loads consisting of cottons and poly-blends.
Cottons
For cottons and most linens. NOTE: Energy Star
®
models are tested on Cottons with default settings.
Bulky/Bedding or
Bulky Items
For large coats, bed spreads, mattress covers, sleeping bags, blankets, comforters, jackets, small rugs,
and similar large and bulky items.
Active Wear
Clothing worn for active sports exercise and some casual wear. Fabrics include new technology
finishes and stretch fibers such as Spandex. Also for clothing labeled Easy Care or Perma Press: For
wrinkle-free and permanent press items.
Delicates
For lingerie and special-care fabrics.
Speed Dry or
Quick Dry
For small loads that are needed in a hurry, such as sports or school uniforms. Can also be used if the
previous cycle left some items damp, such as collars or waistbands.
Towels/Sheets
Use for towels OR sheets. It is not recommended to mix towels and sheets in the same load.
Sanitize
Reduces certain types of bacteria by 99.8%, including: Staphylococcus aureus, Pseudomonas
aeruginosa, and Klebsiella pneumoniae. The antibacterial process occurs when high heat is used
during a portion of this drying cycle.
Steam Dewrinkle
Full Loads
Provides 20 minutes of steam drying to assist with dewrinkling clothes.
Ideal for loads left in dryer
for an extended time.
Warm Up
Provides 10 minutes of warming time to warm up clothes.
Air Fluff
Provides 10 minutes of tumbling time without heat.
Time Dry
Use to set your own dry time. Time Dry is also recommended for small loads. To use:
1. Turn dry cycle dial to Time Dry.
2. Increase the drying time by pressing the Add Time button.
Note: This button only increases the time. When max time is reached, pressing the button again
will reset the counter to the lowest setting.
3. Select the Temp.
4. Close the door.
5. Press Start/Pause.
Dry Cycles
The dry cycle controls the length and tumble speed of the drying process. The chart below will help you match the dry
setting with the loads.
3
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 143 144

Commentaires sur ces manuels

Pas de commentaire