Ge 19209 GE Wireless Seven-Sound Door Chime Two Push Manuel d'utilisateur télécharger pdf (Page 9)

Troubleshooting

Chime doesn't work:

1. Make sure push button switch is depressed and held for at least 1 second.

2. Make sure plastic tag is removed from battery.

3. Make sure house code switches 1-6 on chime and push button match

exactly.

4. Verify battery orientation in push button.

5. Try fresh batteries.

6. Make sure chime is not farther than 150 feet away from push button.

7. Ensure push button is not mounted on metal, near metal studs, or near the

floor.

8. Try a new location for the chime.

Functional range may be adversely affected by one or more of the following

factors: weather, radio frequency interference, low transmitter battery and

obstructions between the transmitter and receiver.

This device complies with Part 15 of the FCC rules. Operation is subject to the

following conditions:

1. This device may not cause harmful interference, and

2. This device must accept interference received, including any interference that

may cause undesired operation.

For technical support contact Jasco Products Company at 1-800-654-8483

or www.jascoproducts.com

Made in China

is a trademark of

General Electric Company

and is used under license to

Jasco Products Company LLC,

311 N.W. 122nd Street,

Oklahoma City, OK 73114.

www.jascoproducts.com

Rev. 1-07 19209

1 2 3 4 5 6 7 8 9

Pas de commentaire

Ge 19209 GE Wireless Seven-Sound Door Chime Two Push Manuel d'utilisateur Page 9