Ge ZET2S Manuel d'utilisateur télécharger pdf (Page 37)

37

To clean

the door

Inside of the door:

• Because the area inside the gasket is cleaned

during the self-clean cycle, you do not need to

clean this by hand. Any soap left on the liner

causes additional stains when the oven is

heated, so be sure to rinse thoroughly.

• The area outside the gasket can be cleaned

with a soap-filled scouring pad.

• Do not rub or clean the door gasket—

the fiberglass material of the gasket has an

extremely low resistance to abrasion. An intact

and well-fitting oven door gasket is essential

for energy-efficient oven operation and good

baking results. If you notice the gasket

becoming worn, frayed or damaged in

any way or if it has become displaced on

the oven, you should have it replaced.

Outside of the door:

• Depending on your model, see the Stainless

steel surfaces section or the Painted surfaces

section.

Care and Cleaning

Wall Oven

Painted surfaces include the door, top

of the control panel and the drawer front.

Clean these with soap and water or a vinegar

and water solution.

Do not use commercial oven cleaners, cleaning

powders, steel wool or harsh abrasives on any

painted surface.

Painted

surfaces (on

some

models)

Do not use a steel-wool pad; it will scratch the

surface.

To clean the stainless steel surface, use

warm sudsy water or a stainless steel cleaner or

polish. Always wipe the surface in the direction

of the grain. Follow the cleaner instructions for

cleaning the stainless steel surface.

To inquire about purchasing stainless steel

appliance cleaner or polish, or to find the

location of a dealer nearest you, please call our

toll-free number, 800.626.2002 or visit ge.com.

Stainless steel

surfaces (on

some models)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 127 128

Commentaires sur ces manuels

Pas de commentaire