GE JDP36 Manuel d'utilisateur télécharger pdf (Page 24)

OPERATING THE SELF-CLEANING OVEN

(continued)

After a Clean Cycle

You may notice some white ash in the oven. Just wipe

it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap-filled

steel wool pad. Be sure to rinse thoroughly with a

vinegar and water mixture. These deposits are usually

a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle,

repeat the cycle.

If the shelves have become hard to slide, wipe the

shelf supports with cooking oil.

NOTE: No functions can be programmed before the

door automatically unlocks.

Questions and Answers

Q. If my oven clock is not set to the correct time

of day, can I still self-clean my oven?

A. If the clock is not set to the correct time of day you

will not be able to set a delay clean to end at a

specific time.

Q. Can I use commercial oven cleaners on any part

of my self-cleaning oven?

A. No cleaners or coatings should be used around any

part of this oven. If you do use them and do not

thoroughly rinse the oven with water, wiping it

absolutely clean afterwards, the residue can scar

the oven surface and damage metal parts the next

time the oven is automatically cleaned.

Q. What should I do if excessive smoking occurs

during cleaning?

A. This is caused by excessive soil. Press the

CLEAR/OFF pad. Open the windows to rid the

room of smoke. Wait until the oven has cooled and

the word “LOCK” is off in the display. Wipe up

the excess soil and reset the clean cycle.

Q. Is the “crackling” or “popping” sound I hear

during cleaning normal?

A. Yes. This is the sound of the metal heating

and cooling during both the cooking and

cleaning functions.

Q. Should there be any odor during the cleaning?

A. Yes, there will be an odor during the first few

cleanings. Failure to wipe out excessive soil might

also cause a strong odor when cleaning.

Q. What causes the hair-like lines on the enameled

surface of my oven?

A. This is a normal condition, resulting from heating

and cooling during cleaning. These lines do not

affect how your oven performs.

Q. Why do I have ash left in my oven after cleaning?

A. Some types of soil will leave a deposit which

is ash. It can be removed with a damp sponge

or cloth.

Q. My oven shelves do not slide easily. What is

the matter?

A. After many cleanings, oven shelves will become

so clean they do not slide easily. To make shelves

slide more easily, after each self-cleaning function,

dampen fingers with a small amount of cooking oil

and rub lightly over sides of shelf where they

contact shelf supports.

Q. My oven shelves have become gray after the

self-clean cycle. Is this normal?

A. Yes. After the self-clean cycle, the shelves will

lose some luster and discolor to a deep gray color.

Q. Can I cook food on the cooktop while the oven

is self-cleaning?

A. Yes. While the oven is self-cleaning, you can use

the cooktop just as you normally do.

How to Stop a Clean Cycle

1. Press the CLEAR/OFF pad. 2. When the LOCK light goes off and the oven has

cooled below the locking temperature, open the door.

CLEAR



OFF

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Commentaires sur ces manuels

Pas de commentaire

GE JDP36 Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers GE JDP36