Ge UPVH890 Manuel d'utilisateur télécharger pdf (Page 29)

WARNING – NEVER LEAVE

THE BACK OPENING WITHOUT THE PLATE.

(Kit WE1M454)

Installation Instructions

SIDE VENTING (cont.)

Connect standard metal elbows and ducts to

complete the exhaust system. Cover back opening

with a plate (Kit WE1M454) available from your

local service provider. Place dryer in final location.

ADDING COVER PLATE TO REAR OF CABINET

(SIDE EXHAUST)

ADDING ELBOW AND DUCT FOR EXHAUST

TO LEFT OR RIGHT SIDE OF CABINET (cont.)

Plate

(Kit WE1M454)

• Apply duct tape as

shown on the joint

between the dryer

internal duct and

the elbow, and also

the joint between the

elbow and the side duct.

CAUTION: Internal duct joints

must be secured with tape; otherwise, they may

separate and cause a safety hazard.

Duct tape

WARNING – BEFORE

PERFORMING THIS EXHAUST INSTALLATION,

BE SURE TO DISCONNECT THE DRYER FROM ITS

ELECTRICAL SUPPLY. PROTECT YOUR HANDS

AND ARMS FROM SHARP EDGES WHEN

WORKING INSIDE THE CABINET. BE SURE

TO WEAR GLOVES.

BOTTOM VENTING:

Dryer Exhaust to the bottom of cabinet

for Gas and Electric models.

Remove the screw inside the dryer exhaust duct

and save. Pull the duct out of the dryer. Detach

and remove the bottom knockout.

Remove

screw

and save

Remove desired

knockout (one only)

Fixing hole

Cut the duct as shown and keep portion A.

⁄8″

Bottom

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 151 152

Commentaires sur ces manuels

Pas de commentaire

Ge UPVH890 Manuel d'utilisateur Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Séchoirs Ge UPVH890