Ge CGS990SETSS Manuel d'utilisateur télécharger pdf (Page 14)

Using the dock and timer.

Not all features are on all models.

Clock

Make sure the clock is set to the

correct time of day.

To Set the Clock

The clock must be set to the correct time of

day for the automatic oven timing functions

to work properly. The time of day cannot be

changed during a timed baking or self-cleaning

cycle.

~J\ Touch the Clock pad.

Touch the number pads.

Touch the number pads the same way you

read them. For example, to set 12:34, touch the

number pads

1,2,3 and 4 in that order.

If number pads are not touched within one

minute after you touch the Clock pad, the

display reverts to the original setting. If this

happens, touch the Clock pad and reenter the

time of day.

Touch the Start pad until the time of day

shows in the display. This enters the time

and starts the clock.

To check the time of day when the display

is showing other information, simply touch the

Clock

pad. The time of day shows until another

pad is touched.

Kitchen

Timer

On/Off

Set UfMMiMe Omhcr

0 0 0 0 0

CoHTKOLLoam/r

Start

The timer is a minute timer only.

The Clear/Off pad does not affect

the timer.

To Set the Timer (For lower oven only.)

The timer does not control oven operations.

The maximum setting on the timer is 9 hours

and 59 minutes.

\J] Touch the Kitchen Timer On/Off pad.

Touch the number pads until the amount

^^ of time you want shows in the display. The

maximum time that can be entered in

minutes is 59. Times more than 59

minutes should be changed to hours and

minutes. For example, to enter 90 minutes

as 1 hour 30 minutes, touch 1,3 and 0 in

that order.

If you make a mistake, press the Kitchen Timer

On/Off pad and begin again.

Touch the Start pad. After pressing the

Start pad. Set disappears; this tells you the

time is counting down, although the

display does not change until one minute

has passed.

When the timer reaches :00, the control

will beep 3 times followed by one beep

every 6 seconds until the Kitchen Timer

On/Off pad is touched.

The 6-second tone can be canceled by

following the steps in the Special features of

your oven control section under Tones at the

End of a Timed Cycle.

To Reset the Timer

If the display is still showing the time remaining,

you may change it by touching the Kitchen

Timer On/Off pad and then touching the

number pads until the time you want appears

in the display.

If the remaining time is not in the display (clock,

delay start or cooking time are in the display),

recall the remaining time by touching the

Kitchen Timer On/Off

pad and then touching

the number pads to enter the new time you

want.

To Cancel the Timer

Touch the Kitchen Timer On/Off pad twice.

14

Power Outage

If a flashing time is in the display, you have

experienced a power failure. Reset the clock.

Touch the Clock pad once to reset. Enter the

correct time of day by touching the appropriate

number pads. Touch the Start pad.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 113 114

Commentaires sur ces manuels

Pas de commentaire