Ge CT918STSS Manuel d'utilisateur télécharger pdf (Page 27)

Before You Call For Service…

GEAppliances.com

Troubleshooting Tips

Save time and money! Review the charts on the

following pages first and you may not need to call for

service.

Problem Possible Causes What To Do

Control signals after You forgot to enter a bake • Press the Bake pad and desired temperature

entering cooking time temperature or cleaning or the Self Clean Std/Low pad and desired clean time.

or delay start time.

Food does not bake Oven controls improperly set. • See the Using the oven section.

or roast properly

Rack position is incorrect • See the Using the oven section.

or the rack is not level.

Oven thermostat needs • See the $GMXVWWKHRYHQWKHUPRVWDW³'RLW\RXUVHOI

adjustment. section.

Food does not Oven door is open. • Close the door. This model is designed for closed door

broil properly broiling only. Always broil with the door closed.

Oven controls improperly set. • Make sure you press the Broil Hi/Lo pad.

Improper rack position • See the Broiling Guide.

being used.

Food being cooked • For best results, use a pan designed for broiling.

in a hot pan. Make sure it is cool.

Cookware not suited • For best results, use a pan designed for broiling.

for broiling.

The probe is plugged into • Unplug and remove the probe from the oven.

the outlet in the oven.

In some areas the power • Preheat the broil element for 10 minutes.

(voltage) may be low.

• Broil for the longest period of time recommended

in the Broiling Guide.

Clock and timer A fuse in your home may be • Replace the fuse or reset the circuit breaker.

do not work blown or the circuit breaker

tripped.

Oven controls improperly set. • See the Using the clock, timer and control lockout

section.

Oven light does Light bulb is loose or defective. • Tighten or replace the bulb.

not work

Pad operating light is broken. • Call for service.

Extension rack is noisy The rack was cleaned in the • See Extension Rack in the Care and cleaning section.

and/or difficult to slide self-clean cycle and now

• Do not spray with cooking spray or other lubricant

needs to be lubricated.

sprays.

Bearings have become • Install the rack in the oven (see Extension Rack in

misaligned due to handling. the Using the oven section) and pull firmly on the sliding portion

until it reaches full extension. This will reset the bearings to their

proper position.

Release levers on The rack was cleaned in the • Shake and apply the graphite lubrication, shipped

extension rack become self-clean cycle, or the original with your oven, onto the moving parts of the release

difficult to use lubrication was removed by levers and paddle mechanisms. Do not spray with

cleaning. cooking spray or other lubricant sprays.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Ge CT918STSS Manuel d'utilisateur Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Poêles Ge CT918STSS