Ge PGP989SNSS Manuel d'utilisateur télécharger pdf (Page 9)

Before Lighting a Gas Burner

 Make sure all burner heads, burner caps

and grates are in their proper locations (see

Burner Caps, Heads and Electrodes in the

Care and cleaning of the cooktop section).

After Lighting a Gas Burner

 Do not operate the burner for an extended

period of time without cookware on the

grate. The finish on the grate may chip

without cookware to absorb the heat.

 Be sure the burners and grates are cool

before you place your hand, a pot holder,

cleaning cloths or other materials on them.

9

Using the gas surface burners. GEAppliances.com

Throughout this manual, features and appearance may vary from your model.

How to Light a Gas Surface Burner

Push the control knob down and turn it to the

LITE position.

You will hear a little clicking noise—the sound

of the electric spark igniting the burner.

Turn the knob to adjust the flame size. If the

knob stays at LITE, it will continue to click.

When one burner is turned to LITE, all the

burners spark. Do not attempt to disassemble

or clean around any burner while another

burner is on. An electric shock may result, which

could cause you to knock over hot cookware.

If the burner has not been used recently, the

flames may make an excessive noise. This is

normal, and it should dissipate after 4 to 5

minutes.

Push the control knob down and

turn it to the LITE position.

How to Select Flame Size

For safe handling of cookware, never let the

flames extend up the sides of the cookware.

Watch the flame, not the knob, as you reduce

heat. The flame size on a gas burner should

match the cookware you are using.

Any flame larger than the bottom of the

cookware is wasted and only serves to heat the

handle.

In Case of Power Failure

In case of a power failure, you can light the gas

surface burners on your cooktop with a match.

Hold a lit match to the burner, then push in and

turn the control knob to the LITE position. Use

extreme caution when lighting burners this way.

Surface burners in use when an electrical

power failure occurs will continue to operate

normally.

IN CASE OF A POWER FAILURE, THE

VENTILATION SYSTEM WILL NOT OPERATE.

Sealed Gas Burners

The smaller burner (right rear position) will

give the best simmer results. It offers precise

cooking performance for delicate foods, such

as sauces or foods which need to cook over

low heat for a long time. It can be turned down

to a very low simmer setting.

The other burners are higher powered and will

bring liquids to a boil quicker, especially with

the use of a lid.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 71 72

Commentaires sur ces manuels

Pas de commentaire