GE JGBP26 N Manuel d'utilisateur télécharger pdf (Page 25)

Proper care and cleaning are important so your range will give you efficient

and satisfactory service. Follow these directions carefully in caring for it to

help assure safe and proper maintenance.

BE SURE ELECTRICAL POWER IS DISCONNECTED BEFORE

CLEANING ANY PART OF YOUR RANGE.

—

Sealed Burner Assemblies

(on some models)

Dual Burners

(on some models)

CAUTION: DO NOT OPERATE THE

BURNER WITHOUT ALL BURNER

PARTS AND DRIP PANS (IF SO EQUIPPED)

IN PLACE.

Grate

Burner Cap

-(u

\,\

.—.

Burner Base

The burner assemblies should be washed regularly

and, of course, after

spillovers.

Turn all controls OFF before removing burner parts

and drip pans (if so equipped).

The burner grates, caps, burner heads and drip pans

(if so equipped) can be lifted off, making them easy to

clean.

The electrode of the

Electrode

spark igniter is

exposed. When

one burner is turned

LITE,

all the burners””

—

spark. Do not attempt to

disassemble or clean around any burner while

another burner is on. An electric shock may result,

which could cause you to knock over hot cookware.

~Grate

On models with dual burners, the

cooktop

lifts up for

easy access.

The holes in the surface burners of your range must

be kept clean at all times for proper ignition and an

even, unhampered flame.

You should clean the surface burners routinely,

especially after bad

spillovers,

which could clog these

holes. Wipe off surface burners. If heavy

spillover

occurs, remove the surface burners from range.

Burners lift out for cleaning. Lift up the

cooktop

and

then lift out the surface burners.

To remove burned-on food, soak the surface burner in

a solution of mild liquid detergent and hot water. Soak

the surface burner for 20 to 30 minutes. For more

stubborn stains, use a cleanser like Soft

Scrub”

brand

or Bon

Ami@

brand. Rinse well to remove any traces

of the cleanser that might clog the surface burner

openings. Do not use steel wool because it will clog

the surface burner openings and scratch the surface

burners. If the holes become clogged, clean them with

a toothpick.

Before putting the surface burner back, shake out

excess water and then dry it thoroughly by setting it in

a warm oven for 30 minutes. Then place it back in the

range, making sure it is properly seated and level.

(continued next page)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

GE JGBP26 N Manuel d'utilisateur Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers GE JGBP26 N