GE JGBP31 P Manuel d'utilisateur télécharger pdf (Page 22)

OPEMT~G

SELF-CLEA~G

OWN

Normal Cleaning Time: 4 hours

Before a Clean Cycle

Quick Reminder:

1. Prepare the oven for cleaning.

2. Close and latch the oven door.

3. Press the CLEAN pad.

4. Press the INCREASE pad.

If you wish to change preset clean time of 4 hours,

press the INCREASE or DECREASE pad until

desired stop time appears in the display.

Remove the broiler pan, broiler rack, all cookware

and any aluminum foil from the oven—they cannot

withstand the high cleaning temperatures. (Oven

shelves may be left in oven. NOTE: Shelves will

discolor after the self-clean cycle.)

2. Wipe up heavy soil on the oven bottom. If you use

●

Clean top, sides and outside front of oven door with

soap and water. Do not use abrasives or oven cleaners.

●

Do not rub or clean the door gasket (B)—the

fiberglass material of the gasket has an extremely low

resistance to abrasion. An intact and well-fitting oven

door gasket is essential for energy-efficient oven

operation and good baking results. If you notice the

gasket becoming worn, frayed or damaged in any way

or if it has become displaced on the door, you should

have it replaced.

Step 4: Close and latch the door. Make sure the oven

light (C) is off.

Oven shelves may be cleaned in the self-cleaning oven.

However, they will darken, lose their luster and become

hard to slide. Wipe the shelf supports with cooking oil

after self-cleaning to make shelves slide more easily.

Caution: Drip pans should never be cleaned in the

soap, rinse thoroughly before self cleaning to prevent

self-cleaning

ti~en.

staining.

Front Frame

Door Gasket

Light

Clean spatters or spills on the oven front frame (A)

and only that area on

the

oven door that is outside the

gasket (B). Do not clean the gasket. Use detergent and

hot water with a soap-filled steel wool pad, then rinse

well with a vinegar and water mixture. This will help

prevent a brown residue from forming when

the

oven

is heated. Buff these areas with a dry cloth. Never use

a commercial oven cleaner in or around the

self-

cleaning oven.

Do not use commercial oven cleaners or oven

protectors in or near the self-cleaning oven.

combination of any of these products plus the high

clean

cycle

temperatures may damage the porcelain

finish of the oven.

Important

The oven door must be closed and latched and all

controls must be set correctly for the clean cycle to

work properly.

How

to Set Oven for Cleaning

1. Follow steps above to prepare the oven

for cleaning.

2. Close the oven door and slide the latch handle to

the right as far as it will go.

Never force the door latch handle. Forcing the

handle may damage the door lock mechanism.

3. Press the CLEAN pad.

4. Press the INCREASE or

CLEAN

DECREASE pad until desired

Clean Time is displayed.

Clean Time is normally 4 hours. You can change the

Clean Time to anywhere between 2 and 4 hours,

depending on how dirty the oven is. The self-clean

cycle will automatically begin within a few seconds

after the word “CLEAN” is displayed and the word

“ON” appears on the display. When the oven heats to

a high temperature, the word “LOCK” will be

displayed and, a short time later, the door latch handle

will be locked in position. It will not be possible to

open the oven door until the temperature drops below

the lock temperature.

5. When the LOCK light is off, slide the latch handle to

the left as far as it will go and open the door.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

GE JGBP31 P Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers GE JGBP31 P