GE JP340 Manuel d'utilisateur télécharger pdf (Page 13)

Glass Cooktop Cleaning Care and Cleaning

CARE AND CLEANING

Proper care and cleaning are important so your radiant

cooktop will give you efficient and satisfactory

service. If soil, mineral deposits from evaporated

water spills or metal rub-off from aluminum

cookware is not removed, it will burn on the glass

cooktop surface and cause permanent discoloration.

Follow these directions carefully in caring for your

cooktop to assure safe and proper maintenance.

Be sure that the surface unit control knobs are

turned off and that the entire cooktop is cool

before cleaning. Do not use a cooktop cleaner on

a hot cooktop. The fumes can be hazardous to your

health and can chemically attack the glass surface.

BE SURE ELECTRICAL POWER IS OFF AND

ALL SURFACES ARE COOL BEFORE

CLEANING ANY PART OF THE COOKTOP.

Control Knobs

The control knobs may be removed for easier

cleaning.

Before removing the knobs for cleaning, please

note that the knobs are in the proper OFF position.

When replacing the knobs, check the OFF position

to insure proper placement.

The knob stem has a groove in each side. The groove

on one side has a spring clip. The other groove is

clear (see illustration). Check the inside of the knob

and find the molded rib.

Wash the knobs in soap and water or a vinegar and

hot water solution but do not soak.

Replace the knob by fitting the molded rib inside

the knob into the clear groove on the stem.

Spring Clip

Molded Rib

Clear Groove

in Stem

Cooktop Frame

Use the same cleaning methods as those described for the glass ceramic top

with the exception of using a scraper. Do not scrape the frame as this will

damage the metal surface.

1 2 ... 8 9 10 11 12 13 14 15 16

Pas de commentaire

GE JP340 Manuel d'utilisateur Page 13