Ge 164D3333P185-1 Manuel d'utilisateur télécharger pdf (Page 25)

Safety Instructions Operating Instructions Care and Cleaning Installation Instructions Troubleshooting Tips Customer Service

Read these instructions completely and carefully.

Additional Materials You May Need

■ Gas line shut-off valve.

■ Pipe joint sealant that resists action of LP gas.

■ 1/2-inch pipe nipple.

For Rigid Connection:

■ Pipe fittings as required.

For Flexible Connection:

■ Flexible metal appliance connector

(same 3/4-inch or 1/2-inch I.D. as gas

supply line).

■ Flare union adapter line

(1/2-inch NPT x 3/4-inch or 1/2-inch I.D.).

Tools You Will Need

For leveling legs:

■ Channel lock pliers

For gas supply connection:

■ Pipe wrench

For conversion from Natural to LP gas:

■ 1/2-inch open-end wrench

For burner flame adjustment:

■ Phillips head and blade-type screwdrivers

Installing the Backguard

Remove the cooktop.

Place the backguard on top of the end panels

at the rear of the range.

Connect the “disconnect plug” (for power to

the backguard from the range).

Insert the machine screws through the lower

inside flange of the end caps and the end

panels. Secure with the hex nuts provided.

Insert the machine screws through the

elongated holes at the bottom of the

backguard and side flange of the burner box.

Secure with the hex nuts provided.

Attach the lower edge of the backguard to

the vent outlet with 2 sheet metal screws.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Pas de commentaire

Ge 164D3333P185-1 Manuel d'utilisateur Page 25