GE JGP989 Manuel d'utilisateur télécharger pdf (Page 25)

25

Installation Instructions

INSTALLING THE COOKTOP

INSTALLING THE COOKTOP

Lift the cooktop by the glass side edges as

shown.

NOTE: Do not use the glass top vent opening

to lift or move the cooktop into position.

Lower the cooktop into the countertop

opening, guiding it into position. Glass is

fragile—do not allow it to drop onto the

countertop. Support from the underside and

lower slowly.

Carefully remove your fingers one corner at a

time to lower the cooktop into position.

NOTE: Do not use Silicone RTV or caulk to

bond cooktop glass to countertop.

CHECKING FOR FLATNESS

Inspect the cooktop glass for rocking

or uneven gap on all four sides at the

countertop surface. Do not attempt to

force the glass to meet the countertop.

If the cooktop is perfectly flat with the

countertop surface, skip to Step 10.

If there is any rocking or an uneven gap,

then use a

1

⁄4″ nut driver to loosen the

eighteen (18) sheet metal screws on the

bottom panels of the cooktop while it is

still in the countertop.

Loosen each bottom panel screw 1 or 2

turns. After all eighteen (18) screws are

loosened, recheck the cooktop for flatness

with the countertop surface.

Gently bump your hand along the outside

edge of the cooktop if needed to help it

settle evenly onto the countertop surface.

Retighten all eighteen (18) sheet metal

screws.

Check for

uneven gaps

Loosen

screws

1-2

turns

CAUTION:

DO NOT LIFT

FROM

VENT OPENING.

8

9

Loosen

screws

1-2

turns

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 71 72

Commentaires sur ces manuels

Pas de commentaire