GE JGSP20 P Manuel d'utilisateur télécharger pdf (Page 17)

Range Top Burners

—

The holes in the burners must be

kept clean at all times for proper

ignition and an even, unhampered

flame.

You should clean the burners

I

I

routinely, especially after bad

spillovers

which could clog these

holes. Burners

lifl

out for cleaning,

Note:

A screw holds each of the

To remove burners:

1. Grasp burner head and tilt it

to the right to release the two tabs

from slots in the burner support.

2. Lift the end of the burner

assembly, then pull away from the

front of the range to free the air

shutter from the gas valve orifice.

To remove burned-on food, soak

the burners in a solution of mild

burners in place to keep them from

liquid detergent

and

wakr~

So~

wobbling around during shipment.

Remove and discard the shipping

screw.

Burner

Shutter Orifice

the burners for 20 to 30 minutes. If

the

fmd

doesn’t rinse off completely,

scrub them with soap and water and

a brush or plastic pad. Do not use

steel wool or abrasive cleaners

because they will clog the burner

openings and scratch the burners.

If the holes become clogged, clean

them with a toothpick.

Do not attempt to clean burners in

an automatic dishwasher.

Loosene~

food soil can clog burner holes,

and the caustic action of the

dishwasher detergent can damage

the burner heads.

Before putting the burners back,

shake out excess water and dry

them thoroughly by setting them in

a warm oven for 30 minutes.

CL

/

‘“

Burner Support

e

Air Shutter

To replace burners:

1.

Slip the air shutter over the gas

valve orifice.

2. Lower the burner assembly

and hook the tabs in the slots in the

burner support.

3. Be sure both tabs are in their

slots, that the burner sits level and

straight, and that the flash tube

forms a straight line from the

igniter to the burner.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Commentaires sur ces manuels

Pas de commentaire