GE JG5P38 Manuel d'utilisateur télécharger pdf (Page 12)

OVEN CONTROL, CLOCK

T~ER

Clock

To Set the Clock

The clock must be set for the automatic oven timing

functions to work properly. The time of day cannot

be changed during a Timed Baking or Self-Cleaning

cycle.

1. Press the CLOCK pad.

CLOCK

Press the INCREASE or DECREASE pad to set the

time of day.

3. Press the CLOCK pad to start.

CLOCK

Timer

To Set the Timer

The timer is a minute timer;

it does not control oven operations.

The maximum setting on the timer

Press the TIMER pad.

TIMER

is 9 hours and 55

mi~utes.

2. Press the INCREASE

or DECREASE pad

to set the amount of

time on the timer.

The timer will start automatically

within a few seconds of releasing

the pad. The timer, as you are

setting it, will display seconds until

1 minute is reached. Then it will

display minutes and seconds until

60 minutes is reached.

After 60 minutes, it will display

hours

(“HR”

now appears in

display) and minutes until the

maximum time of 9 hours and

55 minutes is reached.

To Reset the Timer

To Cancel the Timer

If “TIMER” is displayed, press the INCREASE or

Press and hold the TIMER pad until the word

DECREASE pad until desired time is reached.

“TIMER” disappears from the display.

If “TIMER” is not displayed, press the TIMER pad

first, then follow the instructions above to set the timer.

End of Cycle Tone

Display Messages

The end of cycle tone is a series of three beeps

“door”

appears in the display, the door is open.

followed by one beep every six seconds. If you would

Close the door. If “LOCK” appears in the display, the

like to remove the signal that beeps every six seconds,

oven door is in the locked position. BAKE, BROIL

press and hold the

CLEAWOFF pad for 10 seconds.

and COOK TIME cannot be set if the door is in the

To return the signal that beeps every six seconds,

locked position.

press and hold the CLEAWOFF pad for 10 seconds.

Power Outage

After a power outage, when power is restored, the

All other functions that were in operation when the

display will flash and time shown will no longer be

power went out will have to be programmed again.

correct-for example, after a 5-minute power

interruption the clock will be 5 minutes slow.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

GE JG5P38 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers GE JG5P38